A library that enables your app to manage remote updates to your application code.
GitHub
npm
expo-updates
is a library that enables your app to manage remote updates to your application code. It communicates with the configured remote update service to get information about available updates.
The expo-updates
library can be automatically configured using EAS Update, which is a hosted service that manages and serves updates to your app. To get started with EAS Update, follow the instructions in the Get started guide.
Alternatively, it is also possible to configure the expo-updates
library manually in cases where a different remote update service is required or configuration is only specified in native files.
-
npx expo install expo-updates
If you're installing this library in a bare React Native app or a generic app with manually configured native code, follow these installation instructions.
If using app config for configuration, this library can be configured by setting at least the following app config properties:
updates.url
: a URL of a remote service implementing the Expo Updates protocolruntimeVersion
: a runtime versionThe remote service must implement the Expo Updates protocol. EAS Update is one such service, but it is also possible to use this library with a custom server.
Example implementation of a custom server and an app using that server
There are build-time configuration options that control the behavior of the library. For most apps, these configuration values are set in the app config under the updates
property.
App Config property | Default | Required? | iOS plist/dictionary key | Android meta-data name | Android Map key |
---|---|---|---|---|---|
updates.enabled | true | EXUpdatesEnabled | expo.modules.updates.ENABLED | enabled | |
updates.url | (none) | EXUpdatesURL | expo.modules.updates.EXPO_UPDATE_URL | updateUrl | |
updates.requestHeaders | (none) | EXUpdatesRequestHeaders | expo.modules.updates.UPDATES_CONFIGURATION_REQUEST_HEADERS_KEY | requestHeaders | |
runtimeVersion | (none) | EXUpdatesRuntimeVersion | expo.modules.updates.EXPO_RUNTIME_VERSION | runtimeVersion | |
updates.checkAutomatically | ALWAYS | EXUpdatesCheckOnLaunch | expo.modules.updates.EXPO_UPDATES_CHECK_ON_LAUNCH | checkOnLaunch | |
updates.fallbackToCacheTimeout | 0 | EXUpdatesLaunchWaitMs | expo.modules.updates.EXPO_UPDATES_LAUNCH_WAIT_MS | launchWaitMs | |
updates.useEmbeddedUpdate | true | EXUpdatesHasEmbeddedUpdate | expo.modules.updates.HAS_EMBEDDED_UPDATE | hasEmbeddedUpdate | |
updates.codeSigningCertificate | (none) | EXUpdatesCodeSigningCertificate | expo.modules.updates.CODE_SIGNING_CERTIFICATE | codeSigningCertificate | |
updates.codeSigningMetadata | (none) | EXUpdatesCodeSigningMetadata | expo.modules.updates.CODE_SIGNING_METADATA | codeSigningMetadata | |
updates.assetPatternsToBeBundled | (none) | N/A | N/A | N/A |
The two core required configuration options are:
updates.url
: the URL at which the library fetches remote updatesruntimeVersion
: a runtime versionThese are configured automatically when following the EAS Update Get started guide.
Each time you build a binary for your app it includes the native code and configuration present at the time of the build as well as native configuration, and this unique combination is represented by a string called a runtime version. A remote update targets one runtime version, indicating that only binaries with a matching runtime version can load the remote update.
The runtime version can be managed manually by setting the string value in the config field.
{
"expo": {
"runtimeVersion": "<runtime_version_string>"
}
}
Runtime version policies derive the runtime version from another piece of information already present in your project. They can be set in the runtimeVersion
config field as follows:
{
"expo": {
"runtimeVersion": {
"policy": "<policy_name>"
}
}
}
Available policy types:
The "appVersion"
policy is provided for projects with that wish to define their runtime compatibility based on the app version.
For example, in a project that has the following in its app config:
{
"expo": {
"runtimeVersion": {
"policy": "appVersion"
},
"version": "1.0.0",
"ios": {
"buildNumber": "1"
},
"android": {
"versionCode": 1
}
}
}
The "appVersion"
policy will set the runtime version to the project's current "version"
property. In this case, the runtime version for the Android and iOS builds and any updates would be "1.0.0"
.
This policy is great for projects that contain custom native code and that update the "version"
field after every public release. To submit an app, the app stores require an updated native version number for each submitted build, which makes this policy convenient if you want to be sure that every version installed on user devices has a different runtime version.
When using this policy, you need to manually update "version"
field in the app config every time there is a public release, but for Play Store's Internal Test Track and the App Store's TestFlight uploads, you can rely on "autoIncrement"
option in eas.json to manage versions for you.
The "nativeVersion"
policy is provided for projects that wish to define their runtime compatibility based on the project's current "version"
and "versionCode"
(Android) or "buildNumber"
(iOS) properties.
For example, in a project that has the following in its app config:
{
"expo": {
"runtimeVersion": {
"policy": "nativeVersion"
},
"version": "1.0.0",
"ios": {
"buildNumber": "1"
},
"android": {
"versionCode": 1
}
}
}
The runtime version for the Android and iOS builds and any updates would be the combination of "[version]([buildNumber|versionCode])"
, which in this case would be "1.0.0(1)"
.
This policy is great for projects containing custom native code that update the native version numbers ("buildNumber"
for iOS and "versionCode"
for Android) for each build. To submit an app, the app stores require an updated native version number for each submitted build, which makes this policy convenient if you want to be sure that every app uploaded to the Play Store's Internal Test Track and the App Store's TestFlight distribution tools has a different runtimeVersion
.
It's important to know that this policy requires management of the native version numbers manually between each build.
Also, if you select a different native version between Android and iOS, you'll end up with builds and updates with separate runtime versions.
Thefingerprint
runtime policy is still in beta for SDK >= 51 and not yet considered stable. Use may result in unexpected behavior.
The "fingerprint"
runtime version policy automatically calculates the runtime version for you, including through changes like SDK upgrades or adding custom native code.
{
"expo": {
"runtimeVersion": {
"policy": "fingerprint"
}
}
}
This policy works for both projects with and without custom native code. It works by using the @expo/fingerprint
package to calculate the hash of your project during builds and updates to determine build-update compatibility (also known as the runtime).
If your project does not use Continuous Native Generation, these configuration values may also be set in your app's native configuration files or overridden at during initialization in native code.
On Android, these options are set as meta-data
tags in the AndroidManifest.xml file (adjacent to the tags added during installation if auto-setup was used). You can also set or override them at runtime using UpdatesController.overrideConfiguration()
.
On iOS, these properties are set as keys in the Expo.plist file. You can also set or override them at runtime by calling AppController.overrideConfiguration
.
If your iOS native code or AppDelegate.mm
is written in Objective-C++, you will need to add the following imports to reference methods on EXUpdatesAppController
. This is only necessary for overriding configuration at runtime.
#import "ExpoModulesCore-Swift.h"
#import "EXUpdatesInterface-Swift.h"
#import "EXUpdates-Swift.h"
By default, expo-updates
checks for updates when the app launches. If an update is available, it downloads the update and applies it the next time the app is restarted. You can tune this startup behavior using the checkAutomatically
and fallbackToCacheTimeout
configuration options above.
The library also provides a variety of constants to inspect the current update and functions to customize update behavior from your application code (after startup). For example, one common alternative usage pattern is to manually check for updates after the app has started instead of doing the default check on launch.
You can configure your app to check for updates manually by doing the following steps:
Set the checkAutomatically
configuration value to ON_ERROR_RECOVERY
or NEVER
to disable the library's default launch behavior.
Add the following code to check for available updates, download them, and reload:
import { View, Button } from 'react-native';
import * as Updates from 'expo-updates';
function App() {
async function onFetchUpdateAsync() {
try {
const update = await Updates.checkForUpdateAsync();
if (update.isAvailable) {
await Updates.fetchUpdateAsync();
await Updates.reloadAsync();
}
} catch (error) {
// You can also add an alert() to see the error message in case of an error when fetching updates.
alert(`Error fetching latest Expo update: ${error}`);
}
}
return (
<View>
<Button title="Fetch update" onPress={onFetchUpdateAsync} />
</View>
);
}
Most of the methods and constants in this library can be used or tested only in release builds. In debug builds, the default behavior is to always load the latest JavaScript from a development server. It is possible to build a debug version of your app with the same updates behavior as a release build. Such an app will not open the latest JavaScript from your development server — it will load published updates just as a release build does. This may be useful for debugging the behavior of your app when it is not connected to a development server.
To test the content of an update in a development build, run eas update
and then browse to the update in your development build. Note that this only simulates what an update will look like in your app, and most of the Updates API is unavailable when running in a development build.
To test updates in a release build, you can create a .apk or a simulator build, or make a release build locally with npx expo run:android --variant release
and npx expo run:ios --configuration Release
(you don't need to submit this build to the store to test). The full Updates API is available in a release build.
To test the content of an update in Expo Go, run eas update
and then browse to the update in Expo Go. Note that this only simulates what an update will look like in your app, and most of the Updates API is unavailable when running in Expo Go. Also note that only updates using Expo Go-compatible libraries are supported.
import * as Updates from 'expo-updates';
Updates.channel
Type: string | null
The channel name of the current build, if configured for use with EAS Update. null
otherwise.
Expo Go and development builds are not set to a specific channel and can run any updates compatible with their native runtime. Therefore, this value will always be null
when running an update on Expo Go or a development build.
Updates.checkAutomatically
Type: UpdatesCheckAutomaticallyValue | null
Determines if and when expo-updates
checks for and downloads updates automatically on startup.
Updates.createdAt
Type: Date | null
If expo-updates
is enabled, this is a Date
object representing the creation time of the update that's currently running (whether it was embedded or downloaded at runtime).
In development mode, or any other environment in which expo-updates
is disabled, this value is
null.
Updates.emergencyLaunchReason
Type: null | string
If isEmergencyLaunch
is set to true, this will contain a string error message describing
what failed during initialization.
Updates.isEmbeddedLaunch
Type: boolean
This will be true if the currently running update is the one embedded in the build, and not one downloaded from the updates server.
Updates.isEmergencyLaunch
Type: boolean
expo-updates
does its very best to always launch monotonically newer versions of your app so
you don't need to worry about backwards compatibility when you put out an update. In very rare
cases, it's possible that expo-updates
may need to fall back to the update that's embedded in
the app binary, even after newer updates have been downloaded and run (an "emergency launch").
This boolean will be true
if the app is launching under this fallback mechanism and false
otherwise. If you are concerned about backwards compatibility of future updates to your app, you
can use this constant to provide special behavior for this rare case.
Updates.isEnabled
Type: boolean
Whether expo-updates
is enabled. This may be false in a variety of cases including:
When false, the embedded update is loaded.
Updates.manifest
If expo-updates
is enabled, this is the
manifest (or
classic manifest)
object for the update that's currently running.
In development mode, or any other environment in which expo-updates
is disabled, this object is
empty.
Updates.updateId
Type: string | null
The UUID that uniquely identifies the currently running update. The
UUID is represented in its canonical string form and will always use lowercase letters.
This value is null
when running in a local development environment or any other environment where expo-updates
is disabled.
Example
"xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
useUpdates()
the structures with information on currently running and available updates.
ExpoUpdatesModule
Type: Class extends _default<UpdatesEvents>
ExpoUpdatesModule Properties
checkForUpdateAsync
() => Promise<UpdateCheckResultRollBack | UpdateCheckResultNotAvailable | Omit<UpdateCheckResultAvailable, "manifest"> & ({ manifestString: string; } | { manifest: Manifest; })>
fetchUpdateAsync
() => Promise<UpdateFetchResultFailure | UpdateFetchResultRollBackToEmbedded | Omit<UpdateFetchResultSuccess, "manifest"> & ({ manifestString: string; } | { manifest: Manifest; })>
initialContext
UpdatesNativeStateMachineContext & {
downloadedManifestString: string,
lastCheckForUpdateTimeString: string,
latestManifestString: string,
rollbackString: string
}
Updates.checkForUpdateAsync()
Checks the server to see if a newly deployed update to your project is available. Does not actually download the update. This method cannot be used in development mode, and the returned promise will be rejected if you try to do so.
Checking for an update uses a device's bandwidth and battery life like any network call. Additionally, updates served by Expo may be rate limited. A good rule of thumb to check for updates judiciously is to check when the user launches or foregrounds the app. Avoid polling for updates in a frequent loop.
A promise that fulfills with an UpdateCheckResult
object.
The promise rejects in Expo Go or if the app is in development mode, or if there is an unexpected error or
timeout communicating with the server. It also rejects when expo-updates
is not enabled.
Updates.clearLogEntriesAsync()
Clears existing expo-updates
log entries.
For now, this operation does nothing on the client. Once log persistence has been implemented, this operation will actually remove existing logs.
Promise<void>
A promise that fulfills if the clear operation was successful.
The promise rejects if there is an unexpected error in clearing the logs.
Updates.fetchUpdateAsync()
Downloads the most recently deployed update to your project from server to the device's local storage. This method cannot be used in development mode, and the returned promise will be rejected if you try to do so.
Note:
reloadAsync()
can be called after promise resolution to reload the app using the most recently downloaded version. Otherwise, the update will be applied on the next app cold start.
A promise that fulfills with an UpdateFetchResult
object.
The promise rejects in Expo Go or if the app is in development mode, or if there is an unexpected error or
timeout communicating with the server. It also rejects when expo-updates
is not enabled.
Updates.getExtraParamsAsync()
Retrieves the current extra params.
This method cannot be used in Expo Go or development mode. It also rejects when expo-updates
is not enabled.
Promise<Record<string, string>>
Updates.readLogEntriesAsync(maxAge)
Parameter | Type | Description |
---|---|---|
maxAge (optional) | number | Sets the max age of retrieved log entries in milliseconds. Default to Default: 3600000 |
Retrieves the most recent expo-updates
log entries.
A promise that fulfills with an array of UpdatesLogEntry
objects;
The promise rejects if there is an unexpected error in retrieving the logs.
Updates.reloadAsync()
Instructs the app to reload using the most recently downloaded version. This is useful for
triggering a newly downloaded update to launch without the user needing to manually restart the
app.
Unlike Expo.reloadAppAsync()
provided by the expo
package,
this function not only reloads the app but also changes the loaded JavaScript bundle to that of the most recently downloaded update.
It is not recommended to place any meaningful logic after a call to await Updates.reloadAsync()
. This is because the promise is resolved after verifying that the app can
be reloaded, and immediately before posting an asynchronous task to the main thread to actually
reload the app. It is unsafe to make any assumptions about whether any more JS code will be
executed after the Updates.reloadAsync
method call resolves, since that depends on the OS and
the state of the native module and main threads.
This method cannot be used in Expo Go or development mode, and the returned promise will be rejected if you
try to do so. It also rejects when expo-updates
is not enabled.
Promise<void>
A promise that fulfills right before the reload instruction is sent to the JS runtime, or
rejects if it cannot find a reference to the JS runtime. If the promise is rejected in production
mode, it most likely means you have installed the module incorrectly. Double check you've
followed the installation instructions. In particular, on iOS ensure that you set the bridge
property on EXUpdatesAppController
with a pointer to the RCTBridge
you want to reload, and on
Android ensure you either call UpdatesController.initialize
with the instance of
ReactApplication
you want to reload, or call UpdatesController.setReactNativeHost
with the
proper instance of ReactNativeHost
.
Updates.setExtraParamAsync(key, value)
Parameter | Type |
---|---|
key | string |
value | undefined | null | string |
Sets an extra param if value is non-null, otherwise unsets the param.
Extra params are sent as an Expo Structured Field Value Dictionary
in the Expo-Extra-Params
header of update requests. A compliant update server may use these params when selecting an update to serve.
This method cannot be used in Expo Go or development mode. It also rejects when expo-updates
is not enabled.
Promise<void>
CurrentlyRunningInfo
Structure encapsulating information on the currently running app (either the embedded bundle or a downloaded update).
Name | Type | Description |
---|---|---|
channel (optional) | string | The channel name of the current build, if configured for use with EAS Update, |
createdAt (optional) | Date | If In development mode, or any other environment in which |
emergencyLaunchReason | string | null | If |
isEmbeddedLaunch | boolean | This will be true if the currently running update is the one embedded in the build, and not one downloaded from the updates server. |
isEmergencyLaunch | boolean |
|
launchDuration (optional) | number | Number of milliseconds it took to launch. |
manifest (optional) | Partial<Manifest> | If In development mode, or any other environment in which |
runtimeVersion (optional) | string | The runtime version of the current build. |
updateId (optional) | string | The UUID that uniquely identifies the currently running update if Example
|
Manifest
Literal Type: multiple types
Acceptable values are: ExpoUpdatesManifest
| EmbeddedManifest
UpdateCheckResult
Literal Type: multiple types
The result of checking for a new update.
Acceptable values are: UpdateCheckResultRollBack
| UpdateCheckResultAvailable
| UpdateCheckResultNotAvailable
UpdateCheckResultAvailable
The update check result when a new update is found on the server.
Name | Type | Description |
---|---|---|
isAvailable | true | Whether an update is available. This property is false for a roll back update. |
isRollBackToEmbedded | false | Whether a roll back to embedded update is available. |
manifest | Manifest | The manifest of the update when available. |
reason | undefined | If no new update is found, this contains one of several enum values indicating the reason. |
UpdateCheckResultNotAvailable
The update check result if no new update was found.
Name | Type | Description |
---|---|---|
isAvailable | false | Whether an update is available. This property is false for a roll back update. |
isRollBackToEmbedded | false | Whether a roll back to embedded update is available. |
manifest | undefined | The manifest of the update when available. |
reason | UpdateCheckResultNotAvailableReason | If no new update is found, this contains one of several enum values indicating the reason. |
UpdateCheckResultRollBack
The update check result when a rollback directive is received.
Name | Type | Description |
---|---|---|
isAvailable | false | Whether an update is available. This property is false for a roll back update. |
isRollBackToEmbedded | true | Whether a roll back to embedded update is available. |
manifest | undefined | The manifest of the update when available. |
reason | undefined | If no new update is found, this contains one of several enum values indicating the reason. |
UpdateFetchResult
Literal Type: multiple types
The result of fetching a new update.
Acceptable values are: UpdateFetchResultSuccess
| UpdateFetchResultFailure
| UpdateFetchResultRollBackToEmbedded
UpdateFetchResultFailure
The failed result of fetching a new update.
Name | Type | Description |
---|---|---|
isNew | false | Whether the fetched update is new (that is, a different version than what's currently running).
Always |
isRollBackToEmbedded | false | Whether the fetched update is a roll back to the embedded update. |
manifest | undefined | The manifest of the fetched update. |
UpdateFetchResultRollBackToEmbedded
The roll back to embedded result of fetching a new update.
Name | Type | Description |
---|---|---|
isNew | false | Whether the fetched update is new (that is, a different version than what's currently running).
Always |
isRollBackToEmbedded | true | Whether the fetched update is a roll back to the embedded update. |
manifest | undefined | The manifest of the fetched update. |
UpdateFetchResultSuccess
The successful result of fetching a new update.
Name | Type | Description |
---|---|---|
isNew | true | Whether the fetched update is new (that is, a different version than what's currently running).
Always |
isRollBackToEmbedded | false | Whether the fetched update is a roll back to the embedded update. |
manifest | Manifest | The manifest of the fetched update. |
UpdateInfo
Literal Type: multiple types
Combined structure representing any type of update.
Acceptable values are: UpdateInfoNew
| UpdateInfoRollback
UpdateInfoNew
Structure representing a new update.
Name | Type | Description |
---|---|---|
createdAt | Date | For all types of updates, this is
a |
manifest | Manifest | For updates of type |
type | UpdateInfoType.NEW | The type of update. |
updateId | string | For updates of type Example
|
UpdateInfoRollback
Structure representing a rollback directive.
Name | Type | Description |
---|---|---|
createdAt | Date | For all types of updates, this is
a |
manifest | undefined | For updates of type |
type | UpdateInfoType.ROLLBACK | The type of update. |
updateId | undefined | For updates of type |
UpdatesLogEntry
An object representing a single log entry from expo-updates
logging on the client.
Name | Type | Description |
---|---|---|
assetId (optional) | string | If present, the unique ID or hash of an asset associated with this log entry. |
code | UpdatesLogEntryCode | One of the defined code values for |
level | UpdatesLogEntryLevel | One of the defined log level or severity values. |
message | string | The log entry message. |
stacktrace (optional) | string[] | If present, an Android or iOS native stack trace associated with this log entry. |
timestamp | number | The time the log was written, in milliseconds since Jan 1 1970 UTC. |
updateId (optional) | string | If present, the unique ID of an update associated with this log entry. |
UseUpdatesReturnType
The structures and methods returned by useUpdates()
.
Name | Type | Description |
---|---|---|
availableUpdate (optional) | UpdateInfo | If a new available update has been found, either by using |
checkError (optional) | Error | If an error is returned from either the startup check for updates, or a call to |
currentlyRunning | CurrentlyRunningInfo | Information on the currently running app. |
downloadedUpdate (optional) | UpdateInfo | If an available update has been downloaded, this will contain the information for that update. |
downloadError (optional) | Error | If an error is returned from either a startup update download, or a call to |
initializationError (optional) | Error | If an error occurs during initialization of |
isChecking | boolean | True if the app is currently checking for a new available update from the server. |
isDownloading | boolean | True if the app is currently downloading an update from the server. |
isUpdateAvailable | boolean | True if a new available update has been found, false otherwise. |
isUpdatePending | boolean | True if a new available update is available and has been downloaded. |
lastCheckForUpdateTimeSinceRestart (optional) | Date | A |
NO_UPDATE_AVAILABLE_ON_SERVER
UpdateCheckResultNotAvailableReason.NO_UPDATE_AVAILABLE_ON_SERVER = "noUpdateAvailableOnServer"
No update manifest or rollback directive received from the update server.
ROLLBACK_NO_EMBEDDED
UpdateCheckResultNotAvailableReason.ROLLBACK_NO_EMBEDDED = "rollbackNoEmbeddedConfiguration"
A rollback directive was received from the update server, but this app has no embedded update.
ROLLBACK_REJECTED_BY_SELECTION_POLICY
UpdateCheckResultNotAvailableReason.ROLLBACK_REJECTED_BY_SELECTION_POLICY = "rollbackRejectedBySelectionPolicy"
A rollback directive was received from the update server, but the directive does not pass the configured selection policy.
UPDATE_PREVIOUSLY_FAILED
UpdateCheckResultNotAvailableReason.UPDATE_PREVIOUSLY_FAILED = "updatePreviouslyFailed"
An update manifest was received from the update server, but the update has been previously launched on this device and never successfully launched.
UPDATE_REJECTED_BY_SELECTION_POLICY
UpdateCheckResultNotAvailableReason.UPDATE_REJECTED_BY_SELECTION_POLICY = "updateRejectedBySelectionPolicy"
An update manifest was received from the update server, but the update is not launchable, or does not pass the configured selection policy.
UpdateInfoType
The different possible types of updates.
Currently, the only supported type is UpdateInfoType.NEW
, indicating a new update that can be downloaded and launched
on the device.
In the future, other types of updates may be added to this list.
UpdateInfoType Values
NEW
UpdateInfoType.NEW = "new"
This is the type for new updates found on or downloaded from the update server, that are launchable on the device.
ROLLBACK
UpdateInfoType.ROLLBACK = "rollback"
This type is used when an update is a directive to roll back to the embedded bundle.
UpdatesCheckAutomaticallyValue
The possible settings that determine if expo-updates
will check for updates on app startup.
By default, Expo will check for updates every time the app is loaded.
Set this to ON_ERROR_RECOVERY
to disable automatic checking unless recovering from an error.
Set this to NEVER
to completely disable automatic checking.
UpdatesCheckAutomaticallyValue Values
NEVER
UpdatesCheckAutomaticallyValue.NEVER = "NEVER"
Automatic update checks are off, and update checks must be done through the JS API.
ON_ERROR_RECOVERY
UpdatesCheckAutomaticallyValue.ON_ERROR_RECOVERY = "ON_ERROR_RECOVERY"
Only checks for updates when the app starts up after an error recovery.
ON_LOAD
UpdatesCheckAutomaticallyValue.ON_LOAD = "ON_LOAD"
Checks for updates whenever the app is loaded. This is the default setting.
WIFI_ONLY
UpdatesCheckAutomaticallyValue.WIFI_ONLY = "WIFI_ONLY"
Only checks for updates when the app starts and has a Wi-Fi connection.
UpdatesLogEntryCode
The possible code values for expo-updates
log entries
UpdatesLogEntryCode Values
ASSETS_FAILED_TO_LOAD
UpdatesLogEntryCode.ASSETS_FAILED_TO_LOAD = "AssetsFailedToLoad"
INITIALIZATION_ERROR
UpdatesLogEntryCode.INITIALIZATION_ERROR = "InitializationError"
JS_RUNTIME_ERROR
UpdatesLogEntryCode.JS_RUNTIME_ERROR = "JSRuntimeError"
NONE
UpdatesLogEntryCode.NONE = "None"
NO_UPDATES_AVAILABLE
UpdatesLogEntryCode.NO_UPDATES_AVAILABLE = "NoUpdatesAvailable"
UNKNOWN
UpdatesLogEntryCode.UNKNOWN = "Unknown"
UPDATE_ASSETS_NOT_AVAILABLE
UpdatesLogEntryCode.UPDATE_ASSETS_NOT_AVAILABLE = "UpdateAssetsNotAvailable"
UPDATE_CODE_SIGNING_ERROR
UpdatesLogEntryCode.UPDATE_CODE_SIGNING_ERROR = "UpdateCodeSigningError"
UPDATE_FAILED_TO_LOAD
UpdatesLogEntryCode.UPDATE_FAILED_TO_LOAD = "UpdateFailedToLoad"
UPDATE_HAS_INVALID_SIGNATURE
UpdatesLogEntryCode.UPDATE_HAS_INVALID_SIGNATURE = "UpdateHasInvalidSignature"
UPDATE_SERVER_UNREACHABLE
UpdatesLogEntryCode.UPDATE_SERVER_UNREACHABLE = "UpdateServerUnreachable"
UpdatesLogEntryLevel
The possible log levels for expo-updates
log entries
UpdatesLogEntryLevel Values
DEBUG
UpdatesLogEntryLevel.DEBUG = "debug"
ERROR
UpdatesLogEntryLevel.ERROR = "error"
FATAL
UpdatesLogEntryLevel.FATAL = "fatal"
INFO
UpdatesLogEntryLevel.INFO = "info"
TRACE
UpdatesLogEntryLevel.TRACE = "trace"
WARN
UpdatesLogEntryLevel.WARN = "warn"
Code | Description |
---|---|
ERR_UPDATES_DISABLED | A method call was attempted when the Updates library was disabled, or the application was running in development mode |
ERR_UPDATES_RELOAD | An error occurred when trying to reload the application and it could not be reloaded. For bare React Native apps, double-check the setup steps for this library to ensure it has been installed correctly and the proper native initialization methods are called. |
ERR_UPDATES_CHECK | An unexpected error occurred when trying to check for new updates. Check the error message for more information. |
ERR_UPDATES_FETCH | An unexpected error occurred when trying to fetch a new update. Check the error message for more information. |
ERR_UPDATES_READ_LOGS | An unexpected error occurred when trying to read log entries. Check the error message for more information. |
ERR_NOT_AVAILABLE_IN_DEV_CLIENT | A method is not available when running in a development build. A release build should be used to test this method. |